DynaSet™ Drop-in Anchors
|
The DynaSet™ Drop-In Anchor is an all steel, medium duty, displacement setting, expansion anchor designed to provide a permanent anchorage point in concrete. Its internal thread allows it to be used with both machine bolts and threaded rod, placing no restrictions on fixture thickness. The DynaSet™ requires the use of the correct setting tool to ensure full expansion of the anchor body. The setting tool also acts as visual check for correct setting of the anchor. |
SPECIFICATIONS
Material
|
Carbon Steel, Stainless Steel 316 (A4) |
Corrosion Protection |
Zinc Plating |
Head Styles |
-
|
Fixing Method |
Fixture Aligned |
Setting Method |
Displacement |
Anchoring Sizes |
Expansion |
Thread Diameters |
M6, M8, M10, M12, M16, M20 |
Drilled Hole Diameters |
8mm, 10mm, 12mm, 15mm, 16mm, 20mm, 25mm
|
Anchor Lengths |
25mm, 30mm, 40mm, 50mm, 60mm, 65mm, 80mm |
Maximum Fixture Thickness’ |
- |
Indicative Working Loads in 32MPa Concrete* |
Max Tensile 2.5kN -15.8kN Max Shear 2.2kN - 13.1kN |
Substrates |
Concrete |
* Refer to load table under "Technical Data & Documents" tab
|
|
|
|
FEATURES & BENEFITS
- The Dyna Set™ fits flush with, or just below, the surface of the substrate, leaving no protrusions when not in use and allowing for easy patch work.
- The anchor’s internal thread facilitates the use of machine bolts and threaded studs of any length, removing restrictions on fixture thickness.
- The DynaSet™ requires only shallow embedment, which reduces the risk of drilling into rebar.
- The setting tool provides a visual expansion check for correct setting of the anchor.
- The flanged version (zinc plated only) has a retaining lip to keep the anchor flush with the surface of the substrate. This also allows for consistent threaded rod drop lengths.
|
|
INSTALLATION GUIDE
- Drill or core a hole to the recommended diameter and depth. Clean the hole thoroughly with a hole cleaning brush. Remove the debris with a hand pump, compressed air, or vacuum.
- Insert the anchor into the hole. Using a hammer and the appropriate setting tool, drive the expansion plug into the anchor until the shoulder of the tool rests against the surface of the anchor.
- Position the fixture, insert the bolt or threaded rod and tighten with a spanner.

|
|
TECHNICAL DATA & DOCUMENTS
PRODUCT INFORMATION
|
TECHNICAL INFORMATION
|
|
|
RANGE Select product to view details
Standard Stainless Steel Grade AISI 316 (A4)
|
|