FomoPlus™
|
|
Versatile FomoPlus™ is a polyurethane polymer that reacts with moisture in the air causing it to expand to fill any shaped hole or cavity. The cured foam can then be cut or shaped and painted as desired. The FomoPlus™ applicator ensures foam is dispensed accurately to provide a neat finish and reduce waste. FomoPlus™ is ideal for thermal insulation, to block out drafts or to fill or repair big holes prior to painting. |
|
SPECIFICATIONS
|
typical Properties
Yield, Free Expansion 750 g Can
|
> 17 litres
(bulk density approx. 15 to 25 kg/m3) |
Tack-free time
|
10 minutes (3 cm width, 23°C, 50% RH)
|
| Cuttable |
45 minutes (3 cm width, 23°C, 50% RH)
|
Load bearing
|
24 hours
|
| Canister temperature |
+ 10°C to + 30°C |
| Ambient Temperature |
+ 5°C to + 35°C |
| Optimum working temperature |
+ 20°C |
| Tensile Strength (DIN53455) |
90 kPa |
| Water absorption (EN1609) |
0.2 Vol. -% |
| Thermal conductivity (EN12667) |
36 mW / m.K |
| Service Temperature |
Long-term- 40°C to + 90°C |
| Service Temperature |
Short-term- 40°C to + 130°C |
| Shelf-life |
9 months |
| Substrates |
Particleboard / Chipboard, Medium Density Fibreboard (MDF), Fibre Cement
Sheet, Timber , Hardboard, Plywood, Concrete, Plasterboard, Galvanised
steel, Brick, Mild steel, Ceramic tiles, Acrylic, Cardboard, Stone, Aluminium,
Concrete Block, Rigid PVC |
| Flexibility |
Low |
Low VOC |
Yes |
| Water Resistance |
High |
Paintable |
Yes |
| Water Immersion |
No |
Water Clean Up |
Up |
| Heat Resistant |
No |
Exterior Use |
Yes |
| Fire Rated |
No |
UV Resistant |
No |
|
|
|
FEATURES & BENEFITS
- Expands to completely fill voids
- Predominantly closed cell foam structure - efficient temperature insulation
- Applicator provides neat, accurate dispensing
- Ozone friendly – CFC, FC and HFC free
- Resistant to blockages – ideal for stop / start work
|
|
|
INSTALLATION GUIDE
|
1. Protect surfaces around work area from unwanted drips
2. To aid foam expansion, dampen surfaces using water spray bottle
or similar
3. Fit canister onto applicator gun. Take care not to over tighten or
activate the valve.
4. Shake can vigorously for approximately 60 seconds, then point gun nozzle
into the cavity to be filled and depress trigger to dispense the foam
5. Fill cavity to about 1/3 full. Foam will expand and fill cavity
6. Clean up FomoPlus™ with Fomo Cleaning Solvent before it sets
Refer to Technical Data Sheet and MSDS available from www.ramset.com.au, for precautions and further detailed installation instructions
|
|
|
TECHNICAL DATA & DOCUMENTS
PRODUCT INFORMATION
|
TECHNICAL INFORMATION
|
|
|
|
|
