• One clip for data and standard cable installations
• Multiple cable mounting positions
• Wide soft hook and loop strap (up to 12mm) or hard plastic tie compatible
• Parallel or multi-directional cable fixing
• Single and cable bundle installations
• Non abrasive support and protection of services suits cable in conduit and small diameter pipe installations
• Fix to standard and hard concrete,hollow masonry block and steel formwork
• Patent Pending

1. Gently insert clip mounting tip (centre of clip) into end of Cablemaster™ tool nosepiece.
2. Press clip against substrate material,depress Cablemaster™ tool nosepiece and fix clip.
3. Attach cable to DataLec™ Clip with appropriate tie or strap for the application.

*NOTE: Testing concluded when clip pulled over pin head or strap/tie failed. Job site testing may be required before use to determine actual achievable job site values. Results have been achieved using a CableMaster™ tool set at minimum overdrive setting. Accessories failing to fix correctly should be removed and a new fixing set away from any spalled concrete. Tension load capacities are for static load situations only. Values shown represent a minimum factor of safety of 3:1 against the ultimate capacity.Minimum edge distance 75mm, minimum spacing between fixings 50mm. Tension loads are per fixing, a minimum of 3 fixings should be used per fastened unit. 1. Tested with Pricemark Cable Tie, # CT-76380NAT100 2. Tested with Hook and Loop strap - 12mm @ 60mm overlap with 50mm diam bundle.