WERCS AnkaScrew™ Screw-In Anchors
|
|
The WERCS AnkaScrew™ Screw-In Anchor is a totally removable, medium duty, rotation setting, thread forming anchor, ideal for either temporary or permanent anchoring into substrates such as concrete, brick, hollow brick or block. The WERCS AnkaScrew™ is particularly well suited to close-to-edge or close-to-anchor fixing as it does not expand and burst the surrounding substrate. |
|
SPECIFICATIONS
Material
|
High Carbon Steel |
| Corrosion Protection |
Zinc Plating, Mechanical Galvanising |
| Head Styles |
Flanged Hex
|
| Fixing Method |
Through Fixture |
| Setting Method |
Rotation |
| Anchoring Method |
Thread Forming |
| Drilled Hole Diameters |
6mm, 8mm, 10mm, 12mm |
| Anchor Lengths |
50mm, 60mm, 75mm, 100mm, 150mm |
| Maximum Fixture Thickness’ |
10mm, 15mm, 20mm, 25mm, 35mm, 40mm, 45mm, 50mm, 60mm, 70mm, 90mm |
| Indicative Working Loads in 32MPa Concrete* |
Max Tensile 4.1kN -14.4kN
Max Shear 4.5kN - 16.7kN |
| Substrates |
Concrete, Solid Brick, Solid Block, Hollow Block, Hollow Slab, Hollow Brick |
* Refer to load table under
"Technical Data & Documents" tab |
|
|
|
|
FEATURES & BENEFITS
-
High thread engagement increases clamp force and holding capacity over a wide range of loading.
-
The WERCS AnkaScrew™ is ideal for close-to-edge and close-to-anchor installation as its self-tapping, rotation setting method of installation is subject to low expansion pressure, therefore does not burst the substrate.
-
For concrete, brick & block (solid & hollow).
-
The WERCS AnkaScrew™ thread design provides clearance for rapid removal of material and reduces jamming.
-
The WERCS AnkaScrew™ is 100% removable.
-
The WERCS AnkaScrew™ is both fast and easy to install as it simply screws into a pre-drilled hole.
-
The WERCS AnkaScrew™ is even faster and easier to remove. It simply screws out leaving an empty hole with no protruding metal parts to grind off.
-
Available in galvanised for exterior applications.
-
Suitable for installation with impact wrenches.
|
|
|
INSTALLATION GUIDE
-
Drill or core a hole to the recommended diameter and depth using the fixture as a template. Clean the hole thoroughly with a hole cleaning brush. Remove the debris with a hand pump, compressed air, or vacuum.
-
Insert the WERCS AnkaScrew™ through the fixture and screw it into the hole with either a socket wrench or an impact wrench (with an impact socket) using slight pressure until the self-tapping action begins.
-
Tighten the WERCS AnkaScrew™ until the fixture is held firm. If resistance is experienced when tightening, unscrew the anchor one turn and re-tighten. Ensure that you do not over tighten.
|
|
|
TECHNICAL DATA & DOCUMENTS
PRODUCT INFORMATION
|
TECHNICAL INFORMATION
|
|
|
RANGE Select product to view details
|
|
