CTClip can be used for cable, conduit and tube work.
Maximum cable cluster or tube diameter of 63mm.
Clip base raised above work surface.
In-built energy absorber for optimum pin penetration.
Side mount clip into pin guide.
One handed installation.
Fix from the ground with the PulsaLift™ Pole.
Optional plug and screw installation.

1. Side mount clip into pin guide.
2. Press against work surface. Fire tool.
3. Install the cable or conduit/tube as required. Fasten tie strap.

*NOTE: Test concluded when clip pulled over pin head or cable tie failed. Job-site testing may be required to determine actual achievable job-site values.
Results have been achieved with a CableMaster™ tool set at minimum overdrive setting. Accessories failing to fix correctly should be removed and a new fixing set away from any spalled concrete. Tension loads provided are for static load situations only. Values represent a minimum factor of safety of 3:1 on the lowest test results achieved. Minimum edge distance 75mm, minimum spacing between fixings 50mm. Tension loads are per fixing, however a minimum of 3 fixings per fastening unit should be used.