For catenary wire, cable, and hanger rod installations when fixing to concrete, hollow block and steel.
Improved clampdown to work surface with dimpled baseplate.
Optimum pin penetration with cushioned base.
Strengthening ribs reduce bracket twist and deformation.
Rounded edges to prevent cable damage.
Three methods of installation.
-Fast fixing with CableMaster™ Pulsa™ gas tool.
-TyMaster™ tool installation (See page 52).
-Traditional drill and anchor method.

Suits light to medium duty fixing applications. (see performance table)
Fix from the ground with pole tool.
Eye size - 7mm.

1. Place bracket assembly into the pin guide.
2. Depress pin guide against work surface, fix bracket into position.
3. Attach cables and wires as required.

*Notes:

1. Values represent the maximum recommended working load in tension.
2. A minimum of 5 fastenings per fastened unit must be used.
3. Results have been achieved with a CableMaster™ tool.
4. All visible failures must be replaced and a new fixing set away from any spalled concrete.
5. Tension loads provided are for static load situations only.
6. Job-site testing may be required to determine actual achievable job-site values
7. Minimum edge distance 75mm. Minimum spacing between fixings 50mm.