The Ramset™ TyMaster™ is an effortless, overhead fixing, fully automatic tool with extension pole for efficient, remote, overhead fixing of suspended ceilings and services installations.
Metal to Concrete
Metal to Steel
up to 32mm
Overall Length (including pole)
Concrete, Steel, Masonary
FEATURES & BENEFITS
Fast 10 shot strip feed with automatic advance Lightweight – reduced fatigue in overhead operation Fully automatic – high install rate Safe – patented “Breech lockout” means it can only fire in vertical up position Minimal maintenance
TRADES & APPLICATIONS
Ceiling & Partitioning Contractor
Fixing of suspended ceilings
Light duty cable tray
Catenary wire fixings
Standard Operating Procedure
Always read and understand the instruction manual before attempting to operate a Ramset™ powder actuated tool. Ramset™ also recommends users obtain personal instruction and training from a Ramset™ representative. 1.First insert the power load strip in the tool. 2.Load the correct drive pin, (without compressing the front of the tool). 3.Carefully raise the tool to the ceiling and depress the barrel assembly where the fastening is to be made. 4.While holding the tool perpendicular and compressed against the work surface, forcibly push upwards on the pole handle to fire the tool.