AnkaScrew™ Rod Flanged Head Screw-in Anchor
|
|
Designed specifically for overhead threaded rod applications, flanged head AnkaScrew™ Rod provides a faster screw-in anchoring solution than traditional drop-in anchors. Flanged head AnkaScrew™ Rod is suitable for suspension of sprinkler pipe systems, metal and plastic pipes, steel ductwork, steel trays, steel channel and steel trapeze. Can be used for overhead, horizontal and vertical applications. Well suited to close-to-edge or close-to-anchor fixing as anchor will not expand and risk bursting the surrounding substrate. |
|
SPECIFICATIONS
|
Material
|
Carbon Steel
|
|
Corrosion Protection
|
Zinc Plated
|
|
Head Style
|
M10 Internally Threaded 13mm Hex Head
|
|
Fixing Method
|
Fixture Aligned
|
|
Setting Method
|
Rotation
|
|
Anchoring Method
|
Thread Forming
|
|
Drilled Hole Diameters
|
6mm
|
|
Anchor Lengths
|
35mm
|
|
Substrates
|
Concrete, Solid Brick, Solid Block, Hollow Brick, Hollow Block, Hollow Slab
|
|
|
|
FEATURES & BENEFITS
-
Self-tapping, rotation setting method of installation is not subject to any
expansion pressure, therefore does not risk bursting the substrate.
-
Reinforced flanged washer head design. Protects against the forces of side loading.
-
Fast and easy to install as they simply screw into a small (6mm) pre-drilled
hole, using an impact driver, reducing the risk of incorrect setting, as well
as the dust, noise and fatigue associated with traditional overhead
anchoring methods that require larger holes and manual setting.
-
Short body length minimises re-bar strikes, increasing carbide life.
-
Easily removed leaving an empty hole with no protruding metal parts.
-
Ideal for close-to-edge and close-to-anchor installation.
|
|
|
INSTALLATION GUIDE
-
Drill a 6mm diameter x 45mm (min) deep hole in the desired position. Remove the debris with a hand pump, compressed air, or vacuum.
-
Insert the AnkaScrew™ Rod flanged head and screw it into the hole with either a socket wrench or an impact wrench using slight pressure until the self-tapping action begins.
-
Tighten the AnkaScrew™ Rod flanged head until firm. If resistance is experienced when tightening, unscrew the anchor one turn and re-tighten. Ensure that you do not over tighten.
|
|
|
TECHNICAL DATA & DOCUMENTS
PRODUCT INFORMATION
|
TECHNICAL INFORMATION
|
|
|
;){kind=link}