ClipElec™
|
ClipElec™ is an all purpose cable tie system that may be used for fixing cable, conduit and pipes for a wide variety of electrical and plumbing applications. This system is extremely versatile allowing for many different sized cables, pipes and conduit to be secured. The ClipElec™ all purpose cable tie system may be used with the 4.8mm supplied cable ties or with other cable ties up to a maximum width of 9mm. |
SPECIFICATIONS
Raw Material |
Polypropylene copolymer, high impact, halogen free. UV resistant
|
Capacity |
Up to 9mm cable tie width. |
Spacing Recommendation |
0.5 & 1 metre (approx) |
Fire Resistance Properties |
Incandescent wire test (regulation NFC 20-455) 750°C passed - LCIE laboratory test results N° 438 309 (December 1998) |
Low Temperature Test |
No breakage at 0°C |
Dimensions |
32 x 37mm |
|
|
FEATURES & BENEFITS
ClipElec™ can be used for cable, conduit and tube work. Universal design allows cable ties up to 9mm wide. Designed with an in-built energy absorber for perfect embedment. Clips directly onto the CableMaster™ Pin Guide for one handed operation. Hands are a safe distance from the Pin Guide during installation. Can be used with the PulsaLift™ Pole to fix from the ground. Optional plug and screw installation. Performance Table*
|
|
INSTALLATION GUIDE
1. Simply clip the ClipElec to the tool pin guide. 2. Press against the substrate, press the trigger & the clip is fixed. 3. Install the tube or conduit with cable tie.

|
|
TECHNICAL DATA & DOCUMENTS

*NOTE: Test concluded when clip pulled over pin head or cable tie failed. Job-site testing may be required to determine actual achievable job-site values. Results have been achieved with a CableMaster™ tool set at minimum overdrive setting. Accessories failing to fix correctly should be removed and a new fixing set away from any spalled concrete. Tension loads provided are for static load situations only. Values represent a minimum factor of safety of 3:1 on the lowest test results achieved. Minimum edge distance 75mm, minimum spacing between fixings 50mm. Tension loads are per fixing, however a minimum of 3 fixings per fastening unit should be used.
|
PRODUCT INFORMATION
|
TECHNICAL INFORMATION
|
|
|
|
|