The FP FireFix™ clip fire cable installation system has been developed for installing the specialised fire protection cable required for the safe operation of essentail service equipment during fire emergencies. This system consists of the FP FireFix™ clip installed with a Pulsa™ pin using the CableMaster™ Pulsa™ gas tool.
Powder coated red
FEATURES & BENEFITS
Complies to AS1530.4 Fixes fire rated cables ten times faster than traditional drilling methods Clip manufactured from 316 Stainless Steel powder coated Simply clips shut holding the cable(s) securely. 2 cables per clip Can be used with stainless steel cable ties to install larger cables Fast fixing to non combustible materials such as solid concrete, hollow concrete block and steel Two hour fire protection system for essential services. Utilises a plastic adaptor that fits on the CableMaster™ Pin Guide allowing one-handed installation. Hands are a safe distance from the Pin Guide during installation. Can be used with the PulsaLift™ Pole to fix from the ground. Holds one or two cables. Choice of two sizes. Simply clips shut holding the cable(s) securely. 2 cables per clip.
TRADES & APPLICATIONS
1. Fit adaptor to the CableMaster™ pin guide. 2. Position the FP FireFix™ clip 3. Push the tool against the substrate and fix the FP FireFix™ clip in place. NOTE: remove battery from the tool when fitting the FP FireFix™ adaptor.
TECHNICAL DATA & DOCUMENTS
Fire Standards Compliance When independently tested in accordance with the requirements of the Fire Test Method for Supports & Fixings of AS/NZS 3013:1995 appendix B, “Electrical Installations – Classification of the Fire & Mechanical Performance of Wiring Systems”, the FPFireFix Cable Clip (when fixed to the concrete slab via a Ramset 20mm Heavy Duty Concrete SC6 Gas Pin) was found to be able to support a static load of 1kg. Fire test reports are available upon request.